HOME

UP

SYNTHS

STUDIO

CONTROL


EFFECTS

Super 8

 

LINKS

Number

Type

 Width

Description
901 VCO/LFO 3 Voltage Controlled Oscillator, may used as a LFO or VCO (does not need 901A)
901A VCO controller 1 1V/octave convertor for 901B
901B VCO 1 VCO requires 901A to provide 1v/oct
901C VCO Bi-polar outputs   used on earlier Moogs (2's and 3's) - Very rare
901D VCO output stage 3 Bi-polar, mixable waveforms & clipper - Ultra rare
902 VCA 1 2 signal i/p, 2 o/p, 3 CV (lin or log)
903 White sound 1 The precursor to the 903A module, used on some of the first systems
903A Random signal generator 1 Random Signal Generator, produces white or pink noise.
904 VCF 2 Voltage Controlled Filter used on some of the earlier  Moog Modulars
904A Low-pass VCF 2 The Moog 24dB-per-octave ladder filter
904B High-pass VCF 2  
904C Filter coupler 2 With 904A/B to give extended functions
905 Spring reverb 2  
907 Fixed filter bank 4 Fitted in the Moog 10 and Moog 12.
907A Fixed filter bank 3 Fitted in the Moog 15 and Moog 35.
909 Power supply   Fitted in the Moog 15
910 Power supply 2 Not full height. Designed to fit at the bottom of the cabinets
911 Envelope generator 1 This is a full ADSR though the syntax and layout is different!
911A Dual trigger delay 1 Cinch Jones S-Trigger
912 Envelope follower 1 Produces a CV and S-trigger.
914 fixed filter bank 4 12-band, 125Hz to 5kHz, with high and lowpass knobs
920 Power supply    
921 VCO 2 Voltage Controlled Oscillator with a range from 1Hz to 40kHz or 0.01 Hz to 400Hz (does not need 921A)
921A VCO controller 1 1V/oct inputs and PWM CV for 921
921B VCO 1 This 921b oscillator is said to be more stable than the 901B.
923 Noise, high-pass, and low-pass filter 1 Active HPF and LPF, not VC
928 Sample-and-hold 1 Also features a "glide" control
930 Power supply   This was the power supply for the Moog 35 and Moog 55. It was wired to the CP8A power switch.
932 Dual sample & Hold 1 Try finding one!
950 Keyboard controller   Scale programmer
950A ???    
950B Scale programmer   Allowed for individual note tuning
951 61-note keyboard    
952 49-note, duophonic keyboard    
955 Ribbon controller    
956 Ribbon controller    
958 Pedal controller    
959 Joystick controller    
960 Sequential controller 8 3 rows of eight steps
961 Sequencer interface 3 Include voltage-trigger to S-trigger and back
961CP Sequencer interface panel 4 designed for the Moog 55
962 Sequential switch 1 Used for multiple sequencer row control
962CP Sequential switch 2CP Used for multiple sequencer row control
984 4X4 matrix mixer 6  
991 Filter and attenuator 1 Switched passive HPF,  LPF plus attenuator
992 Control voltages 1 illuminated red or blue switches linked to the 904A
993 Trigger/envelope 1 Features illuminated yellow or green switches
994 Jack multiples 1 2 sets of 4 parallel jacks
994A Jack multiples 1 4 sets of 4 parallel jacks
995 Attenuators 1 3 potentiometer attenuators
995A Attenuators 1 3 Reversible attenuators
1120 Foot pedal N/A Foot pedal for voltage control
1121 Foot switch N/A  
1125 Sample-and-hold N/A Stand alone accessory unit
1130 Drum controller N/A Ludwig drum with trigger circuit
1150 Ribbon controller N/A The Moog ribbon controller mounted on a long thin box.
1630 Bode Frequency Shifter 3 Designed by Harold Bode and made and sold by Moog
1631 Ring modulator 1 Included in Keith Emersons system
1634 Pitch-to-voltage converter   ???
6401 Bode ring modulator N/A Manufactured by RA Moog
6402 Bode dual ring modulator N/A Manufactured by RA Moog
6552 Bode Frequency Shifter 2U Rack Very Early design of Bode Frequency Shifter
CP1 CV (control voltage) and trigger outputs   This was designed for the Moog 3P.
CP2 CV and trigger outputs, and filters 4 Not full height. Designed to fit at the bottom of the cabinets Include passive HPF & LPF, mults and pitch and V-trig from keyboard
CP3 4X1 mixer 4 Not full height. Designed to fit at the bottom of the cabinets. 4 channel mixer plus mults and reversible attenuator.
CP3A Mixer 4 4 channel mixer, trunk lines, mult and VCO control routing with illuminated switches. Again, not full height but designed to fit at the bottom of the cabinets
CP4 CV and trigger outputs, attenuators, etc... 4 This was intended for the Moog 1C. Includes filter, envelope and controller connections and selectors.
CP4A CV and trigger outputs 4 This unit, designed for the Moog 35, is not full Moog module height. It fits in the bottom of the rack only. Similar to the CP4
CP5 CV and trigger outputs/Power 4 This unit was designed for the "P" series Moog modulars. Combines controller outputs and power switch/fuses
CP6 CV and trigger outputs, etc... 4 This unit was designed for the "P" series Moog modulars. Control voltage and trigger selection plus 2 x mults.
CP7 CV and trigger outputs, multiples, etc... 4 This unit was designed for the "P" series Moog modulars. As per CP6 but less the left hand selection switches and external input control.
CP8 Power switch etc. 2 This unit, designed for the Moog 2C and Moog 3C.
CP8A Power switch etc. 2 This unit, designed for the Moog 35 and Moog 55.
CP9 Power switch etc.

4

 This unit, designed for the Moog 3P.
CP10 Power switch

4

 Includes 2 x multiples
CP11 Mixer, triggers, outputs, etc...   This unit was designed for the Moog 10. It has a four-input mixer,  jack multiples, an attenuator, 2 CV and trigger outs, and 2 audio outputs.
CP35 Attenuators/Trunk access

4

 This unit, designed for the Moog 35. Not full height. Designed to fit at the bottom of the cabinets includes +/- 6V and Trunk lines 5 to 8
701 Drum Synthesizer 4 Extremely rare drum voice
702 Percussion Synthesizer 4 Only a few made of these